UNI 4.2 - Self-cleaning filtering unit for welding fumes and dust
From €4,695.00
To €5,900.00
In stock
Applications

MIG MAG

PULSE MIG MAG

MMA STICK ELECTRODE

TIG

PLASMA CUTTING

GRINDING
Use
Extraction of welding smokes and dust from grinding, sanding and thermal cutting
The mobile filtering unit UNI 4.2 is studied for the extraction of welding smokes and dust from grinding, sanding and manual plasma cutting. The unit is provided with 2 cartridge filters in antistatic polyester for a high filtering efficiency (M 99%) and with an automatic cartridge cleaning system by counter-current compressed air. Suited for dry welding fumes only – no oily fumes.
AVAILABLE MODELS
- UNI 4.2 single phase - filtration efficiency BIA "M" >99%
- UNI 4.2 three phase - filtration efficiency ""M"" >99%
- UNI 4.2 single phase with automatic Start/Stop function - filtration efficiency BIA "M" >99%
- UNI 4.2 three phase with automatic Start/Stop function - filtration efficiency BIA "M" >99%
ACCESSORIES
- Articulated extraction arm ARMOTECH - Ø 125 or 160 mm, lengths 2, 3 or 4 m
Certifications


Packing
Structure
UNI 4.2's powder-coated steel casing gives strength and durability to the machine, while maneuverability is guaranteed by built-in pivoting castors and handles. The positioning of the high-performance centrifugal fan downstream of the filter stage in a special soundproof compartment allows to reduce noise levels and to have only clean air passing through the fan. The unit has a user-friendly digital control panel with alarm log and self-cleaning function monitoring. The Pc board is located in a clean chamber off the airflow circuit.
Filter section
The unit is provided with 2 cartridge filters in antistatic polyester for a high filtering efficiency (M 99%). The automatic filter cleaning system by compressed air allows to save time and money by increasing filters life. A deodorising active carbons post-filter can be added. Also, a pre-coating treatment is available on demand and it is recommended in case of use for manual plasma cutting beyond 2 h per day.
Packaging | 100x100x180 cm |
---|---|
Availability | Available |
Technical feature | |
Applications | MIG MAG, PULSE MIG MAG, MMA STICK ELECTRODE, TIG, PLASMA CUTTING, GRINDING |
Applications | Welding, Dust, Plasma cutting |
Conformities | CE, UKCA |
Filtration capacity | M >99% |
Voltage | 230V, 400V |
Products | UNI 4.2 |
It is possible to download the following technical sheets: